The Office: Laying out an Oddly Shaped Room

Our Office project is going to be a Furnishing Project. Based on the need-finding we explained in the Setting the Stage post, we only need a furniture solution rather than a structural solution, which would be a Restructure Project. The first part of a Flashbent Furnishing Project is working with the client to choose a layout for the space. Since it's our own project, we are our own clients!

As I mentioned in the previous post, the room we're transforming is very awkwardly shaped. There are lots of doors, the room slants, and there is a built-in window bench. Due to this difficult configuration of space, we decided to mock up a few different layouts in AutoCAD to ensure that real furniture could actually fit in the space. Typically rough sketches would suffice for allowing the client to see the layout opportunities for their space, but precision was key in this case. The layouts had to have:

• a desk (preferably two)
• chairs (preferably two)
• a sleeper couch 

So here we go!

Layout A: This is a basic arrangement, utilizing the right wall for my desk and the couch. The desk is a little too small for the type of school & business work I anticipate doing in the future.

Layout B: This layout features the main desk near the closet, providing a location for a printer, while also being close to the Ethernet port near the main door. The smaller desk in the corner can be used for my computer work, but again is too small for any layout or drafting work.

Layout C: This layout utilizes the right wall for the full desk space, leaving the window seat open as an alternate seating space to the couch. However, it's a tight squeeze between the desk and the wall to the bathroom.

Layout D: In this layout, there are two different sized desks that are arranged more towards the center of the room. It seems a little tight.

Layout E: This last layout places the desks around the edges, leaving access to the window bench. Also like Layout B, having the main desk near the closet is ideal.

Given the need for large desk space for me and the proximity of the main desk to the closet, we decided to go with Layout E.

Up next is the exciting part, determining the style, where we choose the aesthetic for the room.  Do we want Modern? Traditional? Eclectic? Glam? Check back for the next post to find out!

{Rashida}

Residential Project: Choosing Textiles

In my Introduction to Textiles class at Chabot, we are learning about the properties of different fabrics and their uses. Our first assignment was to select a series of fabrics for a living and dining room space that we had to draw to scale.

The criteria was as follows:

• fabrics | a minimum of 3 patterned (more than one color, not tone on tone) fabrics in each room 
• spaces | dining and living rooms must be open to each other somehow
• measurements | walls to be 6 inches thick and both spaces need to have a combined area of approximately 600 square feet total
• scale | 1/2" scale on 11" X 17" paper
• furniture + decor | living room needs to have six specified items, dining room room needs to have 4
• presentation | fully color rendered floorplan, 3" x 3" samples of each fabric, and written descriptions of textile fibers

This assignment initially posed as a challenge for me because my design aesthetic is very minimal in terms of colors and patterns. But as a designer, I know that it is important to be nimble and flexible because my clients are not going to be just like me. So, I took this assignment as an opportunity to learn, grow, and expand my skill-set.

I am very intrigued by the Moroccan lattice designs and used that as inspiration as I began to explore patterned textiles.

Different lattice patterns that I used as inspiration for the final design.

Simultaneously, I began to create many floor plan iterations of my adjoining living and dining spaces. The many iterations occurred because plotting on AutoCad at 1/2" scale was posing to be a problem.

My first hand-drafted iteration of the floor plan. It ended up being too large of a footprint and wouldn't fit on the 11x17 paper.

There was not enough clearance for some of the furniture in this iteration.

This pretty much ended up being the final design, with a minor adjustment to the ottoman selection.

Eventually, I found a design that fit and went through a process of pairing fabrics together and pairing fabrics with furniture to see how they complemented each other.

This is what I ended up with:

I am very pleased with the final product (as was my professor). You can find the full presentation, with a detailed look of the fabrics and furniture selections here: Moroccan Twist Textiles Assignment.

I am now excited about working with different patterns in fabric and can't wait until I get to implement textiles in a new design.

Cheers,
{Rashida}